Slip-type wet drawing machine MT 160 6A
| Materials | High C Steel | Stainless Steel | EDM Brass |
| Max. inlet Ø[mm] | 1.67 mm | 1.85 mm | 1.85 mm |
| Max. inlet tensile strength [MPa] | 1400 MPa | 800 MPa | 600 MPa |
Min./Max. outlet Ø [mm] | 0.12 - 0.38 mm | 0.10 - 0.50 mm | 0.15 - 0.30 mm |
| Max. speed [m/sec] | 25 m/s | 30 m/s | 25 m/s |
| Max. no. of dies | 22 | 22 | 22 |
Technical features
+ 6-axes machine
+ 160 mm drawing cones diameter
+ Horizontal drawing with transfer cones fully submerged in the lubricant. Each die is equipped with an additional
spray lubrication to improve cleanliness
+ Drawing cones with large diameter in tungsten carbide coated steel
+ Quick and ergonomic emptying/fi lling of drawing tank, ensuring simple, mud-free die replacement
+ Outer die holder equipped with three external adjusting screws for precise die alignment
+ Horizontal drawing capstan in carbide coated steel and internally water-cooled, complete with transfer pulley
+ Motion transmitted by low-noise positive drive belts
