A slip-type wet drawing machine with 300 mm drawing capstans and horizontal cones for ferrous, high carbon, stainless steel and high-resistance aluminium and copper alloy wire. With 21 dies this machine is engineered for a minimum outlet diameter of 0.3 mm
| Inlet wire diameter (mm) | 1.60 | 2.10 | 2.50 | 2.50 | 2.50 | 2.50 |
| Outlet wire diameter (mm) | 0.30 | 0.38 | 0.495 | 0.555 | 0.595 | 0.705 |
| No. of drawing steps | 21 | 21 | 20 | 19 | 18 | 16 |
| Max. speed (m/s) | 20 | 20 | 20 | 20 | 15 | 15 |
Technical features
+ 4-axes machine
+ 350 mm drawing cones diameter
+ Horizontal cones
+ Motion transmission by means of V-belts from the main motor and timing belts between drawing cones
+ Constant torque / power AC motors
+ Cooling by means of a pipe bundle heat exchanger and an emulsion recirculating pump
+ Tank closure by means of an internal mobile partition, actuated by two manually controlled pneumatic cylinders.
+ The outer sound-abating rolling gate is actuated by a single manually controlled pneumatic cylinder
+ Drawing cones with large diameters in tungsten carbide coated steel
+ Outer drawing block in tungsten carbide coated steel and externally air cooled along the whole pulling band width by
an electric fan
+ Air cooled and tiltable wire transfer roller to space wraps onto the capstan to optimise cooling
+ Dies designed with special holes for the injection of lubricant during wire string-up in the inner die holders
+ Outer die holder equipped with three external adjusting screws for precise die alignment
+ Synchronisation by means of a compensating dancer with tilting arm
