Complete multi-wire drawing lines: for aluminum and relative alloys and for plain, tinned and silvered copper wire
Sampsistemi multiwire drawing lines guarantee first-class quality manufacture, which is why our products are valued by customers all over the world. Our transmission system significantly reduces the number of gears required and therefore minimises friction. Our design ensures safer and more reliable drawing operations.
| Drawing machine | DM 105 | DM 105-80 | DM 80 | DM 80 EL |
| Drawing rings Ø [mm] | 105 | 105-80 | 80 | 80 |
| Max inlet Ø [mm] | 3.20 | 2.60 | 2.05 | 3.60 |
| Outlet Ø range [mm] | 0.25 - 1.35 | 0.13 - 0.60 | 0.05 - 0.50 | 0.16 - 0.50 |
| Max no. of wires | 56 | 20 | 40 | 8 |
| Max no. of drafts | 25 | 29 | 37 | 22 |
| Max speed [m/sec] | 40 | 35 | 35 | 25 |
| Annealer | Contact ring Ø [mm] | Max annealing current [A] | Inlet Ø range [mm] |
| AN 350 H | 350 | 7000 | 0.250-1.350 |
| AN 250 H | 250 | 5200 | 0.150-1.024 |
| AN 200 H | 200 | 3500 | 0.150-1.024 |
| AN 160 | 160 | 2200 | 0.100-0.511 |
| AN 120 | 120 | 500 | 0.005-0.200 |
| RC 200 M | 200 | 3500 | 0.150-1.024 |
| RC 160 M | 160 | 2200 | 0.100-0.511 |
| RC 160 | 160 | 2200 | 0.100-0.511 |
| RC 135 | 135 | 1000 | 0.080-0.254 |
Advantages
+ Extremely flexible solutions with a wide range of possible configurations depending on the costumer's requirements
+ High-speed drawing (up to 40 m/sec)
+ Most productive solution available on the market
+ Optimised energy consumption and production processes
+ Drawing machines may be supplied with 105, 80 and 60 mm diameter pulling rings
+ Wide range of annealers with annealing current from 500 to 7000 A
+ Wide range of dynamic (manual and automatic) and static spooling systems
