Standard line composition
| Pay-off | Degreasing unit | Tube forming machine | Lubrication unit | Drawing machine | Spooler |
| SOM 1200 | DU | TFM | LU | MTS 610/5 | BOS 760 |
Low carbon or stainless steel tubular wire can be formed, filled with welding flux and subsequently drawn to diameters ranging from 2.20 to 3.40 mm on this comprehensive line.
Tubular wire is then finish drawn to its final dimensions as per customer requirements, using a drawing machine with a smaller diameter capstan.
This type of line conveniently uses rolling cassettes for the drawing process, meaning it is no longer necessary to anneal the wire before redrawing it to its final dimensions.
Technical data
| Material | Strip
9.50 x 0.40 / 10.70 x 0.65
Low carbon/stainless steel |
| Tensile strength | up to 650 MPa |
| Forming rolls | 4 stages |
| Closing rolls | 4 stages |
| Filling system | laser control |
| Motor power | 8 x 5.5 kW (A.C.) |
| Speed | 6 m/sec |
| Outlet tube diameter | 3.40 - 2.20 mm |
