Dry drawing and coppering lines for SUBARC wire
Standard line composition
| Pay-off | Descaler | Cold
rinsing unit | Pickling
unit | Rinsing
unit | Boraxing
unit | Drying
unit | Drawing
machine | Take-up |
| SOD/2 | RD 80 | CRU | EPU | RU | BU | IF
HAD | MTS 610/7 | ROT 610 |
Technical data
| Material to draw | EN 756 S1, S2, S3 (C≤ 0.12%) SUB ARC welding wire |
| Max tensile strength of material [N/mm²] | 600 |
| No. of capstans | 5 + 1 |
| Capstan Ø [mm] | 560 / 610 / 660 |
| Capstan surface treatment | Tungsten carbide coated |
| Inlet wire Ø range [mm] | 5.50 - 6.50 |
| Outlet wire Ø range [mm] | 2.50 - 5.00 |
| Max. wire outlet speed[m/sec] | 20 |
| Drawing machine AC motor power [kW] | 41 - 60 |
| Cooling water pressure | 2 bar |
| Max. temperature of inlet water | 30 °C |
Advantages
+ Dry drawing line for high, medium and low carbon steel and special alloys (ferrous and non-ferrous)
+ Fixed or rotating die holders; direct or indirect water cooling
+ Synchronisation by means of roller-type loop sensors
+ Dust-proof guards
+ High-efficiency, parallel-axis gear drives
+ Electrical cabinet cooling via air/water heat exchanger or AC system
