5 – 7 October 2016 Wire & Cable India 2016
Once again, Sampsistemi is getting ready for the upcoming Wire show in Mumbai (October 5-7, 2016). The Italian company looks forward to meeting customers, partners and friends at Hall 1, Booth C14. Many innovative solutions for the wire and cable manufacturing will be on display to highlight the importance of this international event. Let’s have a look at some of the most interesting ones.
The Sampsistemi Multiwire Platform is available in three production solution levels, in order to meet all market requirements in terms of capacity needs and investment budget. These three levels are: Entry Level, Flexibility, Mass Production. These solutions vary in terms of production capacity, product range, flexibility, winding solutions and investment requested. The line on display at the Wire show in Mumbai has been specifically designed and engineered for Mass Production.
The Sampsistemi Multiwire Drawing Platform (DM Platform) is based on the splitting of gear transmission into two or more independent sections, with separate AC servomotors. This allows slip recovery between each section and at the inlet side. All motors are synchronised by means of a control motion system. Slipping reduction and the improvement in the quality of gear transmission, bearings and seals result in a reduction of energy consumption by 10-15% and in a consequent improvement of production costs. Die holders have been specifically designed to improve wire lubrication within the die, to reduce friction and to facilitate the wire cleaning, thereby enhancing the product quality and prolonging the die life. Zirconium oxide pulling rings are used to reach the best possible quality surface of the wire.
The Sampsistemi Annealing Platform includes a number of technical features, such as multimotor technology, adjustable pre-heating length and a wire-walker before contact rings. In addition, the cleaning device on contact rings ensures the integrity of the wire surface, the requested physical properties (mechanical strength, elongation, conductivity and resistance) and maintains the diameter and roundness of the wire. The control system is able to set up production parameters, in particular the kinematic ratio between each axis, in order to form a production recipe stored in the HMI panel. The Annealer Platform is completed with the latest development in annealing technology, in particular the development of the electronic equipment that reduces current distortion (THD-I) and energy waste (PF > 0.90).
Sampsistemi looks forward to meeting customers and partners from all over the world at Wire India! Don’t miss this opportunity, visit Hall 1, Booth C14!
Click here to know more about the Wire & Cable India!